Discover switches, routers, firewalls, wireless controllers and SD-WAN edges, then watch them alongside the servers and applications they carry. Remote probes cover branches, stores and plants.
Kllyroo network monitoring polls devices over SNMP v1, v2c and v3 (SHA/MD5, AES/DES), receives traps, analyses NetFlow, discovers neighbours via LLDP/CDP to draw topology maps, backs up and diffs device configurations (NCM), and covers IPAM, switch ports, wireless controllers, SD-WAN and VoIP / IP SLA.
A device page: availability, CPU, memory, temperature and interfaces
Capabilities
What you get
SNMP devices & traps
Interfaces, CPU, memory, temperature, power and vendor templates for Cisco, Juniper, Fortinet, MikroTik, Palo Alto and more.
Topology & discovery
Scheduled discovery scans and LLDP/CDP neighbour data build L2/L3 maps you can drill into.
NetFlow & traffic
Top talkers, applications and conversations, so you can see who is filling the link.
Configuration management (NCM)
Back up device configs, compare versions and alert on unexpected changes.
IPAM & switch ports
Subnets, IP usage and which device sits on which switch port.
Wireless, SD-WAN & VoIP
Wireless controllers, SD-WAN edges and IP SLA tests for jitter, loss and MOS.
Remote sites
Probes for every branch, store and plant
Install a lightweight Linux probe at a remote site to run website and network checks, discovery scans and VoIP / IP SLA tests locally, and send results to your central Kllyroo server. SNMP polling is always done by the Kllyroo server itself.
Protocol / source
Support in Kllyroo
SNMP
v1, v2c, v3 (SHA / MD5 auth, AES / DES privacy); v3 with SHA + AES recommended
Real screenshots from the Kllyroo user guide (demo data). Click any image to enlarge.
kllyroo.your-company.local
Network map
Automatic L2 / L3 map from LLDP, CDP, ARP and routes.
kllyroo.your-company.local
Flow analytics
NetFlow, IPFIX, J-Flow and sFlow top talkers and applications.
kllyroo.your-company.local
Network configuration
Config backups, changes, unsaved changes and compliance.
kllyroo.your-company.local
Network discovery
Subnet sweeps grouped by device class with monitor suggestions.
kllyroo.your-company.local
IPAM
Subnet utilisation and a colour-coded address map.
kllyroo.your-company.local
Switch ports
Port status, speed, VLAN and the connected device.
kllyroo.your-company.local
Wireless
Controllers, access points, radios and clients.
kllyroo.your-company.local
SD-WAN
Tunnel and path latency, jitter, loss and SLA.
kllyroo.your-company.local
VoIP / IP SLA
MOS, jitter, packet loss and round-trip time.
FAQ
Frequently asked questions
Which SNMP versions does Kllyroo support?
SNMP v1, v2c and v3 with SHA or MD5 authentication and AES or DES privacy. SNMP v3 with SHA and AES is recommended.
Do remote probes poll SNMP devices?
No. SNMP polling is always done by the Kllyroo server. Probes run website and network checks, discovery scans and VoIP / IP SLA tests from remote sites.
Can Kllyroo replace PRTG or SolarWinds for network monitoring?
Many teams use Kllyroo to consolidate network monitoring with server, application and log monitoring in one on-premise portal. We recommend a side-by-side pilot on your own devices to confirm vendor template coverage before switching.
Next step
See Kllyroo on your own infrastructure
Get a guided walkthrough, sizing advice for your estate, and a licence quote. Kllyroo installs on your server in under an hour and runs fully offline.
